HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advanced Server Clusters

2
System software:
Navigator version L.18.02 or later
Operating System Microsoft Windows 2000 Advanced Server
SPU
Model HP NetServer LH4
Clock speed 550, 700 MHz
No. of CPUs 2 – 4
BIOS version 4.06.22 PS or later (550 MHz)
4.06.32 PS or later (700 MHz)
CPU cache Any size
RAM 256 MB minimum. Must be HP.
No. of power supplies 3 required, 4 for redundancy
Local storage See
Local Storage below.
I/O slots: P3 – Client LAN
P4 – Intra-cluster (Heartbeat) LANs
P7 – Free or Local storage (NetRAID-1Si)
P8 -- Shared storage HBA
Storage
Local
Controller Boot from embedded SCSI.
May use NetRAID-1Si in PCI slot P7 with BIOS disabled for additional
local storage.
May not use any other additional SCSI controllers.
Drivers Use driver(s) supplied with Microsoft Windows 2000 Advanced Server.
Cabinets (Physical drive
location)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Disk drives Must be HP (hot swap or fixed).
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed.
SCSI Ids Any
Shared
HP Rack Storage/12FC (Required)
Host Bus Adapter
Model HP Fibre Channel Host Bus Adapter - HP D8602A
No. of HBAs 1
Driver Hhba5100.sys 2.06
SPU I/O slot P8
RAID level 0, 1, 3, 5
Cabinet
RAID arrays Not more than eight physical drives per logical array and not more than
eight LUNs are permitted in total.
No. of cabinets 1
FC Array Cards
Model HP Fibre Channel Array Controller - D5990A