Power Supply Upgrade Guide

Chapter 1 Introduction
2
Tools and Related Documentation
To install a redundant power supply, you need an anti-static service kit
(3M

8501/8502/8503 or equivalent). This kit includes a static-dissipating mat.
The following documents describe the HP NetServer LH 3000/3000r or
LH 6000/6000r:
• HP NetServer Installation Guide
• HP NetServer Online Documentation CD-ROM
Contents of This Guide
This guide includes the following chapters:
• Installing a power supply and fan in an HP NetServer LH 3000/3000r
Installing a power supply and fan in an HP NetServer LH 6000/6000r
• Warranty and support information
Precautions
CAUTION Components of this accessory kit are sensitive to static
electricity and can be damaged by improper handling. Read
the following information carefully before you handle the
accessory components:
• Leave the components in the anti-static container until you
are ready to install them.
• Use an anti-static wrist strap and a grounding mat. Read
and follow the instructions included with the wrist strap
and mat.
• Before you remove a component from its anti-static
container, touch a grounded, unpainted metal surface on
the NetServer to discharge static electricity.