6000r Upgrade Guide

Chapter 3 Removing Components from the LH 3000/3000r

2. Unscrew the non-captive thumbscrews securing the two air baffles to the

chassis.

◊ In the HP NetServer LH 3000 (pedestal version), you can see the

thumbscrews from the top of the NetServer. See Figure 3-5.

◊ In the HP NetServer LH 3000r (rack-mounted version), you can see the

thumbscrews from the right side of the NetServer. See Figure 3-6.

NOTE Save these thumbscrews. This same style of screw is used to

secure the new system board in the chassis.

3. Remove the two baffles as shown in Figures 3-5 and 3-6.

Figure 3-5. Remove Thumbscrews and Air Baffles from the

HP NetServer LH 3000 (pedestal version)