HP Netserver LH 3/LH 3r Processor Upgrade Guide

Chapter 1 Processor Module Installation
6
Removing the HP NetServer LH 3r System Board
The bezel and cover panels must be removed to access the system board.
Removing the Bezel
The bezel shown in Figure 1-3 has three clips that mount onto a hinge assembly,
which is secured to the NetServer chassis.
1. Turn off the HP NetServer and disconnect the power cord and telephone
cord.
2. To remove the bezel, pull it toward you until it comes free.
Figure 1-3. Removing the HP NetServer LH 3r Bezel