HP Netserver LH 3/LH 3r Processor Upgrade Guide

Chapter 1 Processor Module Installation
8
Figure 1-5. Screw and Cover Locations
Removing Cover Panels
The NetServer has three removable cover panels (see Figure 1-6):
Cover 1 covers the side where the I/O board is located.
Cover 2 covers the area above the processor.
Cover 3 covers the side where the processor is located.
You will remove cover 2 to access the system board and upgrade the
NetServer processors.
CAUTION The NetServer covers are heavy. Support them as you remove
them, and allow room to move them away from the NetServer
and for storage.