HP Netserver LH 3/LH 3r Processor Upgrade Guide

Chapter 1 Processor Module Installation
22
4. See Figure 1-15. Slide the server into the rack and attach the bezel hinge
to the two (previously installed) rack nuts on the left column (refer to
Figure 1-7) by means of two screws. Secure the latch plate on the right
side of the server to the two previously installed rack nuts on the right
column.
1. Attach
hinge
to rack
nuts previously
placed.
2. Attach the
latch plate to
the front
column with
two screws
into the rack
nuts previously
placed.
Figure 1-15. Attaching the Bezel Hinge