HP Netserver LPr RS12/FC Installation Guide

2
SPU
Model HP NetServer LPr
Clock speed 400, 450, 500, 550, 600, 650, 700 MHz. or higher
No. of CPUs 2
BIOS version 4.06.09 PR or later (400, 450 MHz with Rack Storage/12 D5989A)
4.06.14.PR or later (400, 450 MHz with Rack Storage/12 D5989B)
4.06.14.PR or later (500, 550 MHz with Rack Storage/12 D5989B)
4.06.29.PR or later (600, 650, 700 MHz with Rack Storage/12 D5989B)
CPU cache Any size
RAM 64 MB minimum. Must be HP.
Local storage See
Local Storage below.
I/O slots: P1 – Free or NetRAID Local StorageBus Adapter
P2 – Client LAN
P3 – Host Bus Adapter (Shared Storage)
P4 – Intra-cluster (Heartbeat) LANs
Storage
Local
Controller
May use embedded SCSI controller, NetRAID-1, NetRAID-3, NetRAID-
3Si in PCI slot P1.
May not use NetRAID-1Si.
Cabinets (Physical drive
location)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Disk drives (hot swap or
fixed)
Must be HP.
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed.
SCSI Ids Any
Shared
HP Rack Storage/12FC (Required)
Host Bus Adapter
Model HP D8602A
No. of HBAs 1
Driver 1.12 or later
SPU I/O slot P3
RAID level 0, 1, 3, 5, or 0 & 1
Cabinet
RAID arrays Not more than 8 physical drives per logical array and not more than 8
LUNs are permitted per Rack Storage/12FC and Rack Storage/12
combination in a cluster.
No. of cabinets 1
FC Array Cards
Model D5990A
No. of cards/cabinet 1 - Simplex (Supplied with Rack Storage/12FC.)
2 - Duplex (Additional card required in the Rack Storage/12FC.)
Firmware 4.64-00 or later
Status SCSI ID 5 (fixed)
Disk SCSI IDs 0 – 3, 8 – 15 (fixed)