HP Netserver LXr 8000 for Compaq 4000/7000 Racks
5
2Overview
The steps required to install the NetServer in the rack are summarized below:
NOTE This is only a summary; detailed instructions are provided on the
following pages.
• Measure and mark the appropriate holes on all four rack columns.
• Install four rack nuts on each of the two front rack columns.
• Insert two rack nuts on each of the two rear rack columns.
• Attach the slides to the columns.
• Extend the slides.
• Remove power supply modules from the NetServer.
• Lift the NetServer onto the slides.
• Secure the NetServer to the slides.
• Remove the lifting handles from the NetServer.
• Install the power supply modules in the NetServer.
• Push the NetServer back into the rack enclosure.
• Secure the NetServer to the two front columns.