HP Netserver LXr 8500 NetRAID-3Si Install Guide

NetRAID Supplement to the HP NetServer Microsoft Cluster Installation Guide 2

Notice

The information in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be

liable for errors contained herein or for incidental or consequential damages in connection with the

furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or

reliability of its software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright. All rights are reserved. No

part of this document may be photocopied, reproduced, or translated to another language without the prior

written consent of Hewlett-Packard Company.

The use of trademarks or other designations is for reference purposes only. The following trademarks are

used in this manual:

•

Microsoft and MS-DOS are U.S. registered trademarks of Microsoft Corp.

•

Windows and Windows NT are trademarks of Microsoft Corporation.

Hewlett-Packard

Network Server Division

10955 Tantau Avenue

Cupertino, CA 95014-0770, USA

Intended Audience

This supplement is for the person who installs, administers, and troubleshoots the Microsoft Cluster Server.

Hewlett-Packard Company assumes this person is qualified to service computer equipment and trained to

recognize hazards in products with hazardous energy levels.

NOTE Hewlett-Packard only supports and recommends installation of clustered HP NetServer

systems using Microsoft Cluster Server software by a Microsoft or HP Cluster Certified

Installer.

Version History

Date Change

8 March 99 Revised to add instructions for HP Rack Storage/12.