HP Netserver LXr 8500 NetRAID-3Si Install Guide

Cabinet

RAID arrays A RAID array (logical disk) must be composed of all the same disk model

(i.e., part number and suffix). Different size or speed disks are not allowed

in the same RAID array. Any combination of disk models is allowed on a

SCSI channel. Any combination of disk models is allowed in a cluster.

RAID arrays may not span NetRAID Adapters.

No. of cabinets 1 – 3

Model Rack Storage/12 D5989B plus 1 D6205B for each Rack Storage/12

Status SCSI ID 5 (fixed)

Disk SCSI Ids 0 – 3, 8 – 15 (fixed)

Disk drives: HP 9.1 GB Ultra SCSI Disk Module D6106A

HP 9.1 GB Ultra SCSI Disk Module D6107A

HP 18.2 GB Ultra SCSI Disk Module D6108A

HP 18.2 GB (10k rpm) Ultra SCSI Disk Module D7031A

HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A

HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A

Cables Any 2 HP LVD SCSI cables from the following list:

1 meter D7131A

2.5 meter D6020A

5 meter D6982A

10 meter D6983A

LANs

Intra-cluster (Heartbeat) LAN Client LAN

LAN connection HP D5954A crossover cable or

equivalent

Any LAN

The intra-cluster LAN may only be

used for cluster node communication

via a crossover cable. It may not be

used for client communication.

NIC:

Model HP D5013A/B (10/100TX PCI) Any that is on both the HP Tested

Products List and the Microsoft

Hardware Compatibility List.

Driver 3.27.00.0001 or later Any driver

NOTE If the NIC used is the

same as the Intra-cluster LAN,

then the Client LAN must use the

same driver as the Intra-cluster

LAN.

No. of NICs 1 1 minimum

SPU I\O slot P4 P3