HP Netserver LXr Pro NetRAID Config Guide for Windows NT4.0 Clusters

Shared Storage Cabling

This part of the guide defines the allowable cabling configurations for clusters using the HP

NetServer LXr Pro and HP Rack Storage/8s. Only these cabling configurations and cables are

supported.

NetRAID Ch. 0

NetRAID Ch. 1

NetRAID Ch. 0

NetRAID Ch. 1

NOTES:

1. Configure cluster using 1 or 2

Rack Storage/8s.

2. Channel 0 and 1 of each NetRAID

Adapter for each Lxr Pro must be

connected together through the

Rack Storage/8 as shown in the

diagram. Do not cross channels.

3. The NetRAID Adapter may be

installed in Lxr Pro PCI slots P4-P6.

(The diagram depicts using slot P4.)

4. Cables between the servers and

shared storage must be D5957A Cluster

Adapters.

HP Microsoft Cluster Server with One NetRAID Adapter