HP Netserver LXr Pro NetRAID Config Guide for Windows NT4.0 Clusters

5
NetRAID Adapter 1,
Ch. 0 (top)
Ch. 1 (bottom)
NetRAID Adapter 2,
Ch. 0 (top)
Ch. 1 (bottom)
NetRAID Adapter 1,
Ch. 0 (top)
Ch. 1 (bottom)
NetRAID Adapter 2,
Ch. 0 (top)
Ch. 1 (bottom)
1. Configure cluster using 3 or 4
Rack Storage/8s.
2. Channel 0 and 1 of each NetRAID
Adapter for each LXr must be
connected together through the Rack
Storage/8s as shown on the diagram.
Do not cross channels.
3. The NetRAID Adapters may be
installed in LXr Pro PCI slots P4-P6.
(The diagram depicts using slots P4
and P5.)
4. Cables between servers and shared
storage must be HP D5957A Cluster
Adapters.
NOTES:
Microsoft Cluster Server with Two HP NetRAID Adapters