HP Netserver Service Handbook, Volume 1 - Low End

Bottom of Chassis

Front of Chassis

Installing the cover

Memory

The NetServer E 60's main memory is implemented with 3.3V, 100 MHz, unbuffered SDRAM DIMMs (Dual

In-Line Memory Modules). The NetServer E 60 ships with at least 64 MB of main memory and supports up to

1 GB. Memory is available in the following DIMM capacities: 64, 128, and 256 MB.

There are four DIMM sockets on the system board. DIMMs may be installed in any combination in any

socket. However, HP recommends starting at socket 0 and filling the sockets in order: 1, 2, and 3. Use only

HP DIMMs.

Boot Device Priority

1. IDE CD-ROM Drive

2. Flexible Disk Drive

3. Embedded SCSI A

4. Embedded SCSI B

5. PCI 2

6. PCI 1

7. PCI 6

8. PCI 3

9. PCI 4

10. PCI 5