HP Netserver LC 2000 Pedestal-to-Rack Guide

Chapter 2 Rack Mounting the HP NetServer
12
5. Turn the template over and use it to mount rack nuts (at 7th and 9th holes)
on the left-rear and right-rear rack columns. See Figure 2-3.
Figure 2-3. Placing Rack Nuts on Rack Columns
The template provides you with the nut placement locations. If you don’t
have the template, Figure 2-4 shows rack nut placement for the two rear
rack columns.
"#"
#
#
#
#
#
9th Hole
From Bottom
7th Hole
From Bottom
represents
the EIA unit
numbers on the
rack columns.
Left Right
Rear of
Rack
Attach nuts to this face
of the rear columns.
Bottom of
HP NetServer
Figure 2-4. Rack Nut Locations on the Rack’s Rear Columns