HP Netserver LC 2000 Installation Guide

Chapter 3 Opening and Closing the HP NetServer

6. Swing the bezel open to the left to access the Bezel Release Tab.

7. Press down on the blue Release Tab as shown in Figure 3-2 to release the

bezel from the chassis.

Press down on

Blue Tab to

Release Bezel

Slide Securing

Screws (2)

Blue Slide

Release Button (2)

Hinge Pins (3)

Figure 3-2. Removing the HP NetServer LC 2000r’s Bezel

8. Lift the bezel away from the front of the HP NetServer.