HP Netserver LP 1000r User Guide

Chapter 6 Installing an Additional Processor
50
10. Align the second processor over the empty processor socket.
The socket has a triangle marking for pin-1 that should match the triangle
for pin-1 on the processor near the end of the ZIF lever. See Figure 6-4.
CAUTION Ensure you the align pin-1 of the processor with pin-1 of the
processor socket or pin damage will occur.
11. Insert the second processor into the socket and close the ZIF lever to fully
seat the processor.
You should hear the ZIF lever click when it closes properly.
Pin-1
Marker
Figure 6-4. Installing the Processor on the System Board