HP Netserver LP 1000r User Guide

71
8 Rack Mounting the HP Netserver
(4-Post)
Introduction
This chapter provides the instructions for mounting the HP Netserver in a 4-post
(column) HP System/E or System/U rack. The illustration below shows the
characteristics of the System/E and System/U racks. If you have the older HP
Systems rack, see Chapter 13, "Alternative Rack Mounting (4-post)," for
instructions. If you are mounting the Netserver in a 2-post non-HP rack, refer to
Chapter 7, "Rack Mounting the HP Netserver (2-Post)," or see the documentation
in the appropriate rack accessory kit.