HP Netserver LXr Pro8 Memory Board

Chapter 2 Installing Memory in the 4 GB Memory Board
17
4. Locate the slot where you will install the 128 SDRAM DIMM, and spread
the two DIMM retaining clips outward. (Figure 2-12).
Retaining
Clip
Retaining
Clip
Figure 2-12. Installing a DIMM Module
5. Align the notches on the SDRAM DIMM with the notches on the socket.
6. Hold the SDRAM DIMM so that the front edge faces straight down into
the connector (at a 90° angle to the memory board).