HP Netserver LXr Pro8 Memory Board

Chapter 2 Installing Memory in the 4 GB Memory Board
20
3. Being careful not to touch board components, ease the first memory board
into the top memory board slot and close the retaining latches on the front
of the memory board to seat it snugly (Figure 2-13).
Memory
Board
Slots
Satellite
Chassis
Base Chassis
4 GB Memory Board
Retaining Clips
Figure 2-13. 4 GB Memory Board Installation
4. Install the second memory board in the lower slot. Verify that both
memory boards are fully inserted into their respective system board
connectors.
5. Reattach the rear access panel.
a. Lower the panel into place. A slotted flange extends from the top of
the panel on either side. Lower the slots over the matching tabs on the
satellite chassis
b. Tighten the captive screws.