HP Netserver LXr Pro8 Memory Board

Chapter 3 Troubleshooting
27
• ECC Multiple-bit errors (two bits or more). Multiple-bit errors, which
are extremely rare, may cause the system to halt or display a memory
parity error. If this occurs, take the following steps:
1. Cycle the system power.
2. During the power-on self test (POST), press the ‘D’ key to test
memory.
◊ If the memory test passes, then the memory failure could be a soft
ECC error.
Reboot the system and reactivate your applications.
◊ If the memory test fails, please contact your support representative for
additional assistance to isolate the problem.
Troubleshooting Resources
If you are having problems installing your 4 GB Memory board, a number of
different tools help to troubleshoot the problem:
• HP NetServer LXr Pro8 User Guide
• HP NetServer Navigator CD-ROM
◊ HP NetServer Information Assistant
List of Error Messages and Beep Error Messages
Problem solving processes
◊ NetServer Utilities