HP Netserver Service Handbook, Volume 1 - Low End

2. Press the Reset button on the front of the HP NetServer. The HP NetServer will boot from the

HP NetServer Navigator CD-ROM. The HP NetServer Navigator Main Menu will appear.

3. To access the express or custom configuration, select "Configure NetServer" and press Enter

to access Express or Custom configuration options. At the next menu, select "Express" or

"Custom" and follow directions.

Or go to NetServer Utilities and select EISA Configuration Utility.

Configuration (CFG) Files

For the system to operate properly, all ISA and EISA boards must have a configuration (CFG) file. CFG files

store information about the boards in the system that PCI boards and some operating systems require to

operate properly.

Creating a Configuration (CFG) File

If you are installing EISA or ISA boards, use the CFG file included with the board. If a CFG file is not

included, contact the manufacturer of the board. If a CFG file is unavailable from the manufacturer, perform

the following steps:

1. Go to the EISA Configuration Utility.

2. Select “Step 2: Add or remove boards.”

3. Select the appropriate slot for the board and press the Insert key. Follow the directions to

search the HP NetServer Navigator CD ROM for a CFG file for the board. If no CFG file is

found, the message "No CFG Files found" will display.

4. Press F5 (Not listed) and select "Create a CFG file" and follow instructions to create a CFG file

for the board.

5. Select "Step 3: View or edit details."

6. Press F7 and select "Lock/unlock boards." Select the ISA board and lock.

7. Exit and save the configuration.

HP NetServer LS and E Series SCSISelect Utility

Some NetServers includes a built-in, menu-driven SCSISelect configuration utility, which allows you to

change almost all host adapter option settings without opening the computer case or handling the board. The

following table lists the settings you can change with the SCSISelect utility and the default values for these

settings.

Description Default Setting

Host Adapter SCSI ID 7

SCSI Parity Checking Enabled

Reset SCSI Bus at IC Initialization Enabled

Host Adapter BIOS Enabled

Support All Removable Disks as Fixed Disks Boot only

Extended BIOS Translation for DOS Drives > 1 GB Enabled

BIOS Support for Bootable CD-ROM Enabled

BIOS Support for Int13Extensions Enabled

BIOS Support for More Than 2 Drives Enabled