HP Netserver Service Handbook, Volume 2 - Mid

128
In the EISA Configuration Utility, select the Hard Drive 1 (or 2) to be Drive Type 2 or 48 (User Definable) at
the end of the list of choices for any IDE hard disk drives installed. Do not use Hard Disk Auto Configuration.
Verify these parameters as the drive definition:
Parameter 240
MB
270 MB
Cylinders: 723 944
Heads: 13 14
Sectors: 51 40
Precomp: -1 -1
Landing Zone: 722 943
Change the setting of "Posted I/O Writes" to Disabled. If the setting is Enabled, the drive operates very
slowly.
Specifications
Power Supply
Power select switch: 90 to 132 VAC, or 198 to 264 VAC at 47-63Hz
Power Availability
386W continuous, 458W peak
Power Consumption
551/529W maximum with 110/220V supply
654/627W peak with 110/220V supply
System Dimensions
19.3 in. high x 13.7 in wide x 18.1 in deep
(49 cm high x 34.8 cm wide x 46 cm deep)
System Weight
50-70 lbs (22.7-31.8 kg), depending on configuration
Operating Temperature
41 to 95 degrees F (5 to 35 degrees C)
Operating Humidity
20% to 80% non-condensing