HP Netserver Service Handbook, Volume 2 - Mid

154
Switch/
Jumper
Description Default
S8C1
Configuration Switches - Switch S8C1
1
O
N
2 3
CMOS CLEAR
PWD CLR
Flash Enable
CMOS Clear: Setting this switch to ON clears CMOS and set the real-
time clock (RTC) to the manufacturing defaults.
Password Clear: Setting this switch to ON clears the password when
the system reboots. Set to OFF to re-enter the password.
Flash Enable: Setting this switch to ON lets the user update the
contents of flash memory (BIOS) with the HPUpdate Utility.
ON
OFF -
default
ON
OFF -
Default
ON -
Default
OFF
Memory Configuration
Each ECC memory board has 12 SIMM sockets supporting 2 MB-32 MB, 70 ns or faster approved, fast-page
parity SIMMs. You can install any size SIMM in any bank; however, all four SIMMs within a bank must be the
same size.
Bank 1
Bank 2
Bank 3
Bank 1
Bank 2
Bank 3
When installing additional memory, note the following:
• The following HP SIMMs are supported:
Type Product Number
4 MB SIMM (70 ns) D2974A
8 MB SIMM (70 ns) D3577A
16 MB SIMM (70 ns) D2297A
32 MB SIMM (70 ns) D3578A
• SIMMs must be installed in sets of four.
• SIMMs must be installed in sequential order starting with Bank 1.