HP Netserver Service Handbook, Volume 2 - Mid
15
Memory
There are four DIMM sockets on the system board for memory expansion Follow these simple rules when
you plan to install additional memory DIMMs:
• Use only HP DIMMs listed on the Technical Reference Label located inside the HP NetServer
top cover, in Information Assistant, or in Order Assistant.
• DIMMs can be 32 MB, 64 MB, or 128 MB in any combination.
• DIMMs can be installed in any order in any of the four DIMM sockets.
S
y
s
t
e
m
B
o
a
r
d
DIMM
DIMM Slot 0
Static dissipating work surface
Crosspiece must be OFF
of the work surface
DIMM Slot
1
DIMM Slot 2
DIMM Slot 3
Notches
Keys
Retaining Clips
DIMM
CAUTION Only install DIMMs on a system board that is lying flat on a static-dissipating work
surface. Do not rock the DIMM into place, but apply firm and even pressure directly
downward.