HP Netserver Service Handbook, Volume 2 - Mid

28
Control Panel
Po
w
er-On Li g h t
Gree n = p o
w
er is on
Po
w
er B utto n
Reset B utto n
Key b o ard L o ck B u tto n
K ey b o ard Lo ck L ig h t
Yello
w
= keyb o ard
is locked
Hard Dis k A ctiv ity Lig h t
Yello
w
= E m b edded S
CSI
o r IDE b us active
Power Button
Turns the HP NetServer on and off. Note that when the HP NetServer is turned off,
the power to the internal circuitry and mass storage devices is disabled; however,
AC power is still applied to the power supply. Always disconnect the power cord
before removing the cover.
Power-On Light
Green when the HP NetServer is on.
Reset Button
Restarts the HP NetServer. You can press this button if the HP NetServer “hangs” or
“locks up”—it has the same effect as turning the HP NetServer off and on. Save any
work before pressing the reset button. Any information not saved is lost when the HP
NetServer shuts down.
Hard Disk Activity
Light 1
Yellow indicates activity on the Embedded SCSI bus or IDE bus.
Keyboard Lock
Button
Prevents unauthorized use of the keyboard. Press the keyboard lock button to lock
the keyboard. Enter the password to unlock the keyboard.
Keyboard Lock Light
Yellow when the keyboard is locked.
Cover