HP Netserver Service Handbook, Volume 2 - Mid

60
I/O panel
connectors
External SCSI connector
Processor board slot
Internal SCSI connector
IDE disk drive cable
connector
Control panel cable
connector
Flexible disk drive
cable connector
Power supply cable
connectors
Slot 9 - PCI
Slot 7 - EISA/ISA
Slot 1 - EISA/ISA
Fan Connector
Remote power supply connector
SW1 switch
ROM
Battery connector
Power Supply
On connector
Connectors
Connector Number Connector Number
IDE disk drive cable J21 Flexible disk drive J22
Keyboard J25 Mouse J25
Video J26 Parallel J24
Serial J26, J24 SCSI port A J1
SCSI port B J27 EISA/ISA slots J11-J17
PCI slots J19-J20 Fan J2
Power supply J9, J18, J23 Remote power supply J6
Battery J4 Control panel J3
Processor board slot J25 ROM U14
Power supply on J7
System Board Connector J6
This connector is used by the HP Remote Assistant Accessory, a 32-bit EISA Bus Master board used to
remotely monitor server functionality. For additional information on this product, see the documentation that
comes with it. When you install the HP Remote Assistant cable, you will need to remove the jumper on PS
REMOTE and PS ON. If you remove HP Remote Assistant from the server, you must reinstall the jumper
for the server to boot.