HP Netserver Service Handbook, Volume 2 - Mid

82
Power supply on A J26 Remote Assistant J25
Power supply PS1-J19, PS2-J19 SCSI A (IN=FAST) J36
PS3-J20, P4-J122 Color/Monochrome J16
PS4-J17 I
2
C 1 Power supply on B J27
I
2
C 2 J23 -3v Power Module J21
J24 System Switches SW1
Processor board J18 System ROM U39
SCSI B (IN=FAST) J29
System Switches and Jumper Descriptions
Remote Assistant Connector - J22 (LH) and J25 (LH Plus/LH Pro)
This connector is used by the HP Remote Assistant Accessory, a 32-bit EISA Bus Master board used to
remotely monitor server functionality. When you install the HP Remote Assistant cable, you need to remove
the jumper on PS REMOTE and PS ON. If you remove HP Remote Assistant from the server, remember to
re-install the jumper.
HP Remote Assistant
Connector
WARNING If the HP Remote Assistant is not installed and there is no jumper on PS REMOTE
and PS ON, the system will NOT power up.