HP Netserver Ultra3 SCSI HBA Guide

16
1
Setting is valid only if Multiple LUN Support is enabled
2
Settings are valid only if host adapter BIOS is enabled
Starting SCSISelect
Follow these steps to start SCSISelect:
1. Turn on or restart your system.
Initiate Wide Negotiation Yes, No Yes (Enabled)
Enable Disconnection Yes, No Yes (Enabled)
Send Start Unit Command Yes, No Yes (Enabled)
Enable Write Back Cache
1
N/C (No Change)
Yes, No
N/C (No
Change)
BIOS Multiple LUN Support
2
Yes, No No (Disabled)
Include in BIOS Scan
2
Yes, No Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled
Display <Ctrl> <A> Messages during
BIOS Initialization
Enabled, Disabled Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
Enabled, Disabled Enabled
Verbose/Silent Mode Verbose, Silent Verbose
Host Adapter BIOS Enabled
Disabled: Not Scan
Disabled: Scan Bus
Enabled
Domain Validation
2
Enabled, Disabled Enabled
Support Removable Disks Under BIOS
as Fixed Disks
2
Disabled, Boot Only,
All Disks
Disabled
BIOS Support for Bootable CD-ROM
2
Enabled, Disabled Enabled
BIOS Support for Int 13 Extensions
2
Enabled, Disabled Enabled
SCSISelect Options Available
Settings
Default
Setting