HP Netserver Ultra3 SCSI HBA Guide

\HKEY_LOCAL_MACHINE\System\CurrentControlSet\

Services\adpu160m\Parameters\Device

If the Parameters\Device keysalreadyexist,skiptoStep10belowtobegin

entering parameters. If the keys do not yet exist, you will need to create them by

continuing with Step 4.

4. Clickontheadpu160m key.

5. Select Add Key from the Edit menu; Type Parameters in the Key Name

edit box. Leave the Class edit box blank.

6. ClickontheParameters key.

7. Select Add Key from the Edit menu; Type Device in the Key Name edit

box. Leave the Class edit box blank.

To specify a certain host adapter, append Device with the number of the host

adapter. For example, type Device0 for the first host adapter, Device1 for the

second, etc. If you omit the host adapter number, the configuration information

applies to all Ultra3 host adapters.

8. ClickontheDevice key.

9. Select Add Value from the Edit menu; type DriverParameters in the Value

Name edit box. Enter REG_SZ asthedatatypeandpressEnter.

10. A String Editor text box appears. Enter valid parameters in the text box.

When entering multiple parameters, each parameter must be separated by a

space.

NOTE Changes made with the Registry Editor do not take effect until you

restart your system.

Troubleshooting

Most problems can be resolved by following the recommendations in the “Prob-

lems and Solutions” below. If you still experience problems after following the

recommendations, continue with the rest of this section.