HP Netserver Ultra3 SCSI HBA Guide

50
4. Reboot your computer after configuring for CD-ROM access.
5. Follow the instructions in your NetWare documentation for installing a new
server.
6. After NetWare installs the DOS portion of the software, down and exit to
DOS from the server prompt.
7. Copy the adpt160m.ham and adpt160m.ddi from the NetWare directory
of the Ultra3 Family Manager Set disk for NetWare to the c:\server.312
directory.
8. Change directory to c:\server.312,andcopythenwpa_up.exe patch file to
the directory.
9. Run nwpa_up.exe (this will create another file, 312ptd.exe.AnswerY to
the prompt to overwrite cdrom.nlm.)
10. Run 312ptd.exe.
11. Create the directory c:\server.312\cdsave.
12. Copy cdrom.nlm to c:\server.312\cdsave
13. Execute the following command lines to swap the server’s loader:
cd 312ptd\native\loader
lswap loader.exe \server.312\server.exe
cd \server.312
14. Create the startup.ncf file in the c:\server.312 directory using Edit or a text
editor with the following lines:
load c:\server.312\312ptd\native\start\npapatch
load c:\server.312\mmattrfx
load c:\server.312\nbi31x
load c:\server.312\adpt160m
Add any additional driver load lines for dual-channel or multiple-channel host
adapters.
15. Run server.exe.
16. Note the slot number detected for the HP Ultra3 SCSI host bus adapter.