HP Netserver Ultra3 SCSI HBA Guide

52
4. Press F3 and enter a:\netware as the path to the adpt160m.ham driver for
NetWare.
5. Select adpt160m.ham and press Enter.
6. Select No not to save existing file, Ye s to save existing file cdrom.nlm.
7. Select No not to save existing file, Ye s to save existing file nbi.nlm.
8. Select No not to save existing file, Ye s to save existing file nwpa.nlm.
9. Select No not to save existing file, Ye s to save existing file nwpaload.nlm.
10. Select Save parameter and continue, and press Enter.
11. To install additional adapters, follow the procedures from
Step 5.
12. When complete, select Continue the installation to complete the
installation.
NetWare 5.0
Follow these instructions only if you are installing NetWare 5.0 for the first
time:
1. Begin installation of NetWare 5.0 on your server as instructed in your
NetWare documentation.
2. When a screen appears that asks you to add device drivers, select Modify
and press Enter.
3. Select Storage adapters, and press Enter.
4. Press Insert to add storage drivers.
5. Press Insert toaddanunlisteddriver.
6. Insert the HP Ultra3 Family Manager Set disk for NetWare into your floppy
disk drive.
7. Press F3 and enter a:\netware\v5_xx as the path to the adpt160m.ham
driver for NetWare.
8. Select adpt160m.ham and press Enter.
9. Select Return to driver list, and press Enter.