HP Netserver Ultra3 SCSI HBA Guide

mount /dev/boot /stand

cp /stand/unix /stand/unix.orig

NOTE If you ever need to boot up from the pre-update kernel, load the

unix.orig backup kernel at the UNIX boot: prompt. To do this,

type unix.orig and press Enter.

c This step is optional. For extra security, you may back up the mdevice file and

the sdevice.d directory To perform this backup, type the following and press

Enter:

copy -rom /etc/conf /etc/conf.bak

2 To load the driver using installpkg, follow these steps:

a At the UNIX system prompt, type installpkg and press Enter. The screen displays

the following messages:

Confirm

Please insert the floppy disk

Strike Enter when ready

or Esc to stop.

b Insert the Ultra3 Family Manager Set disk for SCO OpenServer and press

Enter. The screen displays the following messages:

Installation is in progress - do not remove the floppy

disk. The following packages are on this disk:

NAME DESCRIPTION

ad160 Adaptec Ultra 160 Family Driver for SCO OpenServer

5.0.x/dxx