HP Netserver Ultra3 SCSI HBA Guide

Please enter the names of the packages you wish to

install, or q to quit:

c At this point, type ad160 and press Enter. The screen then displays this mes-

sage and various installation status prompts:

Installing adl60

When the driver is loaded, the following message appears, indicating that the

adl60 driver has been loaded into the Link Kit for kernel addition:

Installed adl60

3 Modify the mscsi file, if necessary, to change your primary host bus adapter to an

Ultra3 SCSI host bus adapter, using the procedure below:

a Enter the following command:

cd /etc/conf/cf.d

b Use a text editor to edit this file. Enter the following command if using the vi

editor:

vi mscsi

c Search for all entries with the host bus adapter number 0 (zero). The host bus

adapter number is the third column in each entry. For example:

This field applies to SCO OpenServer 5 and later.

Host

Adapter

Prefix

SCSI

Device

Type

Host

Adapter

Number

Target

Logical

Unit

Number

Bus

xx Stp 0 2 0 0

xx Sdsk 0 0 0 0

xx Srom 0 5 0 0