HP Netserver Ultra3 SCSI HBA Guide

89
1. Back up all important computer files.
2. At the UnixWare root prompt, type the following:
For UnixWare 2.1x:
/etc/conf/bin/idinstall -d adst21
The following files will be deleted:
/etc/conf/mdevice.d/adst21
/etc/conf/pack.d/adst21/Driver.o
/etc/conf/pack.d/adst21/space.c
/etc/conf/pack.d/adst21/disk.cfg
/etc/conf/sdevice.d/adst21
For UnixWare 7.01/7.1:
/etc/conf/bin/idinstall -d adst70
The following files will be deleted:
/etc/conf/mdevice.d/adst70
/etc/conf/pack.d/adst70/Driver.o
/etc/conf/pack.d/adst70/space.c
/etc/conf/pack.d/adst70/disk.cfg
/etc/conf/sdevice.d/adst70
3. Then, rebuild the kernel (0 in -g0 is zero, not the letter O):
/etc/conf/bin/idbuild -B -K
cp /etc/conf/cf.d/unix /unix
cd /
shutdown -g0
4. Reconfigure your computer for your alternate or replacement drive
controller, and reboot the computer.