Installation Guide for Compaq 4000/7000 Racks

Installation
8
3rd
(At Rear
Of Column)
5th
5th
3rd
3rd
2nd
2nd
3rd
Unit Below
Intended Installation
Location
Template (optional)
Figure 3-1. Marking Holes For Installation
To mark the NetServer mounting holes on the front columns (refer to Figure
3-1), count up from the top of the unit below, marking the 2nd and 5th holes.
Installing the Rack Nuts
Once you have marked the holes, install one supplied rack nut in each hole
(previously marked) on all columns (see Figure 3-2). You will install eight rack
nuts in the holes marked.