HP Service Insertion Guide K/KA/WB.15.15

CLI command or otherPurposeID
Interface Index : 100663874
Name :
ServiceTunnel-01
Rx Packets : 0
Tx Packets : 0
Rx 5 Minute Weighted Average Rate (Pkts/sec) : 0
Tx 5 Minute Weighted Average Rate (Pkts/sec) : 0
Rx Heartbeat : 0
Tx Heartbeat : 0
Last Recv Heartbeat Timestamp : 01/01/90 00:00:00
HP-E8206zl# debug tunnel intercept
Debug logging for various tunnel related
events
3
HP-E8206zl# show tech tunnel interceptShow Tech command4
Dumps all tunnel related information including
• Statistics
• ASIC encapsulation table contents
• ASIC decapsulation rules
• loopback port information etc
• Tunnel endpoint resolution status
HP-E8206zl# clear interfaces tunnel type intercept
statistics
Clearing tunnel counters5
HP-E8206zl# clear interfaces tunnel type interceptClear/delete tunnels from CLI6
Asynchronous notifications:Notifications for following events:7
• RMON Logs• Tunnel Create
• •Tunnel Delete SNMP Traps
•• OpenFlow PORT STATUS messageTunnel Up
• Tunnel Down
The switch encapsulates the GRE payload with protocol type set to
’Transparent Ethernet Bridging (0x6558)’. This is a standard
Capability to parse an encapsulated
packet (with wireshark)
8
encapsulation type that wireshark can natively understand and be able
to dissect and display packet contents including payload information.
24 Service Insertion