HP Network ScanJet 5 Scanner - Administrator's Guide

Upgrading the Scanner
You can upgrade the firmware for the selected scanner (or restore the
firmware to the previous version). You must have supervisor privileges
on the network environments for which the scanner is configured, and
the scanner must be fully configured in order to be upgraded.
To upgrade the scanner
1 On the Tools tab of the Properties dialog box, click the Upgrade icon.
2 In the Commands box, click Firmware Upgrade to display the Upgrade
dialog box.
3 In the FW Image box, type the location of the firmware (for new
upgrades, usually a floppy drive) or click Browse to locate the firmware.
4 In the Network Environments box, select the network environment you
want to use in the upgrade. This box lists all network environments on
which the scanner has been configured and for which you have
supervisor privilege.
5 Click OK.
To check the results of the upgrade, refer to the Event Log.
34 Scanner Maintenance EN