HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
156
Internal Error
No Unique File Name
Press any key...
A unique file name for the scanner
document could not be created.
This problem occurs if the server
clock has been set to a value back
in time.
Check if the server date and time
are set correctly.
160
Open Remote File
Error
<File Name>(err)
An error has occurred in creating
or opening a file on the server
disk. This happens when a file
cannot be created in the
destination workarea.
Check if the maximum available
disk space for the workarea owner
has been reached.
Check if the workarea associated
with the selected destination still
exists on the server disk.
Check if the specified path exists.
Check if the server disk is full.
Check if the HP Network ScanJet
5 has create and write
permissions in the specified path.
If the user workarea is configured
in a NetWare server, check if the
trustees have been removed. Add
them using NetWare tools or use
HP JetAdmin software to reassign
to the user the same network
environment.
If the server in which the user has
been configured is in an NT or
LAN Server environment, check if
the HP Network ScanJet 5
scanner service (daemon) is
active.
161
Read Remote File
Error
<File Name > (err)
An error occurred in reading the
specified file on the server disk.
If the server in which the user has
been configured is in an NT or
LAN Server environment, check if
the HP Network ScanJet 5
scanner service (daemon) is
active.
Check if the HP Network ScanJet
5 scanner has the correct
permissions in the specified path.
4
Troubleshooting
EN Troubleshooting and Error Messages 53