HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
171
Transport
Disconnection Error
<Server
Identifier>(err)
The HP Network ScanJet 5
scanner detected an error while it
was trying to disconnect from the
server.
Check the LAN cable.
Check if the server is running and
can be reached.
172
Scanner Validation
Error <Server
Identifier>(err)
The HP Network ScanJet 5
scanner detected an error during
validation from the server.
Try the connection again.
Check if the HP Network ScanJet
5 scanner is configured correctly
in the server.
173
Connection Timed
Out
<Object Name>(err)
174
Net Channel Full
<Object Name>(err)
The connection between the HP
Network ScanJet 5 scanner and
the named object was cut off
during transmission for some
unknown reason or because the
channel was busy.
There might be heavy traffic on
the LAN. Try sending the
document again.
Check the LAN cable.
Check if the server is running and
can be reached.
If the server in which the user has
been configured is in an NT or
LAN Server environment, check if
the HP Network ScanJet 5
scanner service (daemon) is
active.
If the problem persists, reboot the
HP Network ScanJet 5 scanner.
175
No Data on Channel
<Object Name>(err)
The connection between the HP
Network ScanJet 5 scanner and
the named object was cut off while
waiting for data for a long time on
the channel.
Use the Reinitialize option under
the Tools tab to reset the HP
Network ScanJet 5 scanner.
If the problem persists, call HP
Support Service.
176
Network Error
Network
Environment Failure
(err)
The HP Network ScanJet 5
scanner detected an error while
trying to access a network
resource database on the scanner.
Use the Reinitialize option under
the Tools tab to reset the HP
Network ScanJet 5 scanner.
If the problem persists, call HP
Support Service.
4
Troubleshooting
EN Troubleshooting and Error Messages 55