HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
160
Open Remote File
Error
<File Name>(err)
161
Read Remote File
Error
<File Name>(err)
162
Write Remote File
Error
<File Name>(err)
An error has occurred in opening,
reading,orwritingafileonthe
server disk. This error occurs
when a file cannot be created in
the destination workarea.
Check if the workarea associated
with the selected destination still
exists on the server disk.
Check if the specified path exists.
Check if the server disk is full.
Check if the maximum available
disk space for the workarea owner
has been reached.
Check if the scanner has create
and write permissions in the
workarea owned by the selected
destination.
If the user workarea is configured
in a NetWare server environment,
check if trustees have been
removed. If so, add them using
NetWare tools or, using the HP
JetAdmin software, reassign the
user to the same network
environment.
If the user workarea is configured
in an NT or LANServer
environment, check if the HP
Network ScanJet 5 scanner
service (daemon) is still active.
170
Transport
Connection Error
<Server
Identifier>(err)
The scanner detected an error
while trying to contact the
specified server.
Try scanning again.
Check the LAN cable.
Check if the server is running.
Check the connection to the
server.
Check if the server address is
configured correctly.
If the user workarea is configured
in an NT or LANServer
environment, check if the HP
Network ScanJet 5 scanner
service (daemon) is still active.
4
Troubleshooting
EN Troubleshooting and Error Messages 59