HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
Outofmemoryin
Internet E-mail
subsystem.
Memory is low. Add more memory.
Increase the size of the page file.
Param does not start
with-or/.
The parameter is not identified
with a /.
Verify the format of the parameter.
Parm unrecognized. The parpameter is not defined
correctly
Verify the parameter information.
SMTP gateway
rejected an address.
The Simple Mail Transfer Protocol
(SMTP) is the defined protocol for
E-mail messages on the Internet.
This address format is
user@destination.
Verify that the e-mail address is
correct.
SMTP gateway not
found on newtwork.
The software was unable to find
the SMTP gateway on the network.
Verify the gateway address.
Check the connection to the
gateway.
SMTP gateway not
specified on
command line.
SMTP gateway must be specified
for e-mail functionality to work.
Specify SMTP gateway or TCP/IP
address on command line using /S.
TCP/IP address of
SMTP gateway not
found.
The /S parameter is not a valid
TCP/IP address nor fully qualified
domain name.
Verify the TCP/IP address.
There was an error
starting the Internet
E-mail subsystem.
Internet e-mail will not be available. See the accompanying messages
for more information.
Too many retries for
message.
The software failed to deliver the
message to the gateway.
Verify that the gateway is up and
running.
Transaction failed.
Resetting connection.
There has been a communication
failure.
Network traffic is too high. Try
again.
Unable to locate
FROM: field.
Thesoftwaremustbeabletoread
the information in the FROM: field
before it can process the message.
Verify that the client software is
generating the HPSIF.DAT file in
the user work area.
Verify that the FROM: field is
specified.
Unable to parse
HPSIF.DAT file.
Thesoftwaremustbeabletoread
the information in the FROM: field
before it can process the message.
Verify that the client software is
generating the Hpsif.dat file in the
user work area.
Verify that the FROM: field is
specified.
4
Troubleshooting
EN Troubleshooting and Error Messages 71