HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
Could not open the
file. Please verify it is
not used by other
applications.
The file could not be opened.
The file may be in use by another
application.
The file maybe corrupt.
The user does not have rights to
access the file.
Close the file or the application
that is using it.
Verify the rights to access the file.
A document was
received for an
automatic workflow
which does not exist.
The HP Network ScanJet 5 Utility
was unable to complete the
automatic workflow link.
Make sure the link has not been
deleted from the PaperPort
software.
E-mail address
already present.
The user is creating an e-mail
address with the same Internet
address as an existing e-mail
destination.
Type a unique Internet address for
the e-mail destination.
E-mail functionality
is not enabled.
E-mail will not be
available.
The currently selected user is a
Novell NetWare user.
Select Change user from the
Options menu and select a user
belonging to a Windows NT
domain.
The error reporting
service could not be
initialized.
The service you are trying to
access does not start.
Make sure the software is installed
correctly.
Make sure there are enough
system resources available to run
the software.
Your fax document
could not be
successfully sent to
its destination.
Your fax document was not sent. Wait a few minutes and resend
your fax document.
Make sure the fax server is
configured correctly on the
scanner in the HP JetAdmin
software.
The file conversion
service was unable
to be initialized.
The service you are trying to
access does not start.
Make sure the software is installed
correctly.
Make sure there are enough
system resources available to run
the software.
The following
component can’t be
found.
The HP Network ScanJet 5 Utility
cannot find a needed .DLL.
Check if the software has been
correctly installed.
74 Troubleshooting and Error Messages EN