HP Network ScanJet 5 Scanner - Administrator's Guide

2
Initial Software Configuration
Overview
As the network administrator, you configure the scanner and the scanner
network environment and add users, printers, fax numbers and
distribution lists to create a public destination list for the scanner. You
use the HP Network ScanJet 5 administrative software, which is part of
the HP JetAdmin software, to perform these functions.
A scanner can be configured for a specific server, domain, or an entire
network. The HP Network ScanJet 5 scanner operates in the following
network environments:
• Novell NetWare 3.1x, with IPX
• Novell NetWare 4.x NDS, with IPX
• Windows NT 3.51 and 4.0, with TCP/IP
• IBM LAN Server 3.0 and 4.0
Note In NT and LAN Server environments, a scanner service (daemon) must
be installed and running on a server in each domain.
The HP Network ScanJet 5 scanner client software, HP Network
ScanJet 5 Utility, operates in the following environments:
• Windows 3.1x, with IPX NetWare shell, or Microsoft TCP/IP
• Windows for Workgroups 3.11, with IPX NetWare shell, or Microsoft
TCP/IP
• Windows 95, with IPX NetWare and Microsoft shells, or Microsoft
TCP/IP (32 bit)
• Windows NT 3.51 and 4.0 with IPX NetWare and Microsoft shells, or
Microsoft TCP/IP (32 bit)
EN Initial Software Configuration 15