HP Network ScanJet 5 Scanner - Administrator's Guide

Configuring the Network Environment
The network environments on which the selected scanner is currently
configured are listed on the Networks tab, under Configured Network
Environments.
Note You may not need to enter any information on this tab, since the network
environment (such as an NT domain name, a LAN server domain name,
a NetWare 3.1x server name, or an NDS tree name) is added
automatically to the list when the first resource (user, user group, print
queue, or fax server link) belonging to that environment is added to the
public destination list.
The Synchronize Time With box displays the network environment with
which the scanner’s internal time is synchronized.
To configure additional environments
1 On the Networks tab, click Change to display the Network
Environments dialog box.
2 In the Available box, select a network environment with which you want
the scanner to work. This list shows all available networks for which the
scanner has not yet been configured and for which you have supervisor
access privileges. Only networks using the same protocol stack as the
scanner are displayed.
3 Click Add. The network environment is added to the Configured box.
The first environment added becomes the environment with which the
scanner’s internal time is synchronized, unless you specify otherwise.
4 Click OK.
If you have added a NetWare 4.x NDS network environment, the
appropriate dialog box appears.
To select a server in an NDS network environment
1 In the NetWare NDS Network Environment dialog box, enter the
Scanner NDS Context, which defines the context where the scanner
object is created in the NDS tree.
2 Select the Scanner Server, which is the name of the server used by the
scanner.
If you have added an NT environment or a LAN Server environment,
the HP JetAdmin software displays a dialog box with the current
settings.
2
Initial Software Configuration
EN Initial Software Configuration 19