HP Network ScanJet 5 Scanner - Administrator's Guide

HP JetAdmin Software Maintenance
Procedures
The HP JetAdmin software provides you with tools to quickly perform
scanner maintenance. For each of the procedures described on the
following pages, you’ll need to first select the scanner in the HP
JetAdmin software and then select the procedure on the Tools tab of the
Properties dialog box.
To get to the Tools tab
1 Connect to a network environment (with supervisor status) and start the
HP JetAdmin software. The main window appears, listing all configured
scanners, printers, plotters, and copiers.
2 Select the scanner for which you want to perform a maintenance
procedure.
3 From the Device menu, choose Properties.
4 In the Properties dialog box, click the Tools tab.
Backing Up the Scanner Configuration
It’s a good idea to back up your scanner configuration on a frequent and
regular basis. Always do a backup before product exchange.
To back up the scanner configuration
1 On the Tools tab of the Properties dialog box, click the Backup icon.
2 In the Commands box, click Backup.
3 In the Backup dialog box, specify the directory in which the backup
should be placed.
4 Click OK. The message Backup in progress is displayed until
the backup is completed. You can click Abort at any time to cancel the
backup. The message Scanner backup was successfully
completed is displayed at the end of the process.
To check the results of the backup, refer to the Events Log.
30 Scanner Maintenance EN