HP Network ScanJet 5 Scanner - Administrator's Guide

Cleaning the Scanner
You’ll occasionally want to clean your scanner, as described in the
following procedure.
Caution Always turn off the scanner and unplug all power cords before cleaning.
To clean the scanner
1 With a clean, soft cloth and a mild detergent, wipe off the outside of the
scanner.
2 Dry the scanner with a clean, soft cloth.
3 Open the ADF. (If you remove the ADF, be sure to disconnect the cables
first.)
4 Open the delivery guide by grasping the small plastic handles on either
side of the delivery guide and pulling down.
5 Use a clean, soft, dry cloth to wipe the inside surface of the delivery
guide sheet.
6 Close the delivery guide and wipe its outside surface with the cloth.
3
Scanner Maintenance
EN Scanner Maintenance 35