HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
This network
environment is not
responding and
cannot be cleaned
up.
The listed network environments
are not available. The cleanup
operation failed.
Check the LAN cable.
Make sure the network
environment is available.
Make sure you have supervisor
access to the network
environments.
Cannot create the
user workarea
The HP JetAdmin software cannot
create the workarea for the
specified user.
Check the LAN cable.
Make sure the server is still
available.
Make sure you have supervisor
access to the network
environments.
Make sure the specified path is
correct.
The scanner server
currently selected for
the network is no
longer valid. Please
change the network
environment
configuration
The scanner server currently
selected for the network
environment is no longer valid; it
may be because:
• It is not responding (a possible
network problem).
• In an NT or LAN Server
environment, the network
scanner service (daemon) has
not been found on the server.
• In an NDS environment, no
connection with supervisor
rights has been found on the
server.
Choose Modify and then enter the
network page; double-click the
network environment; from the
property window, select another
server from the available list; click
OK.
In NDS, log on to the server and
then re-enter information in the
Modify Properties screen.
4
Troubleshooting
EN Troubleshooting and Error Messages 67