HP Network ScanJet 5 Scanner - Administrator's Guide

Error Message Error Description Actions
There are no valid
network users
available. Please
connect to a valid
network user and
run this program
again. <Error
Description>
The network user is connected but
is not a valid user.
Connect as a valid user.
Check the connection.
See <Error description>.
Unable to show the
log file.
An error is occuring while trying to
show the file.
Verify the file is not being used by
another application. If it is in use,
close the application.
Verify the WRITE.EXE application
is available on your PC under the
SYSTEM32 directory.
User’s workarea is in
an incorrect state.
There is a problem accessing the
user’s workarea on the server.
Check if the server is available.
Check if you are running the HP
JetAdmin software with supervisor
access to the server.
Make sure the selected workarea
name is correct.
Make sure the user workarea still
exists on the server. If not,
manually create the workarea on
the server.
76 Troubleshooting and Error Messages EN