HP Network ScanJet 5 Scanner - Administrator's Guide

Message Category Recommended Action
Document failed General The document cannot be sent to the
target application.
Check if the link is still available.
Check the document format.
Check your system resources.
Try again.
Can’t register with the network
component
General SSNET failed to start. Make sure the
user’s networking software is installed and
operating correctly.
Destination is busy General The target application is not ready to
receive documents.
Wait a few minutes and then retry.
Close the target application and retry.
Destination is not valid Link The selected link is not valid. Check if the
target link is still available.
86 Troubleshooting and Error Messages EN