45xx Modular Disk Subsystem Manual for G-Series Releases

Ordering Information
For manual ordering information: domestic U.S. customers, call 1-800-243-6886; international customers, contact
your local sales representative.
Document Disclaimer
Information contained in a manual is subject to change without notice. Please check with your authorized Tandem
representative to make sure you have the most recent information.
Export Statement
Export of the information contained in this manual may require authorization from the U.S. Department of
Commerce.
Examples
Examples and sample programs are for illustration only and may not be suited for your particular purpose. Tandem
does not warrant, guarantee, or make any representations regarding the use or the results of the use of any examples
or sample programs in any documentation. You should verify the applicability of any example or sample program
before placing the software into productive use.
U.S. Government Customers
FOR U.S. GOVERNMENT CUSTOMERS REGARDING THIS DOCUMENTATION AND THE ASSOCIATED
SOFTWARE:
These notices shall be marked on any reproduction of this data, in whole or in part.
NOTICE: Notwithstanding any other lease or license that may pertain to, or accompany the delivery of, this
computer software, the rights of the Government regarding its use, reproduction and disclosure are as set forth in
Section 52.227-19 of the FARS Computer Software—Restricted Rights clause.
RESTRICTED RIGHTS NOTICE: Use, duplication, or disclosure by the Government is subject to the
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS 52.227-7013.
RESTRICTED RIGHTS LEGEND: Use, duplication or disclosure by the Government is subject to restrictions
as set forth in paragraphþ(b)(3)(B) of the rights in Technical Data and Computer Software clause in
DAR 7-104.9(a). This computer software is submitted with “restricted rights.” Use, duplication or disclosure is
subject to the restrictions as set forth in NASA FARþSUP 18-52þ227-79 (Aprilþ1985) “Commercial Computer
Software—Restricted Rights (Aprilþ1985).” If the contract contains the Clause at 18-52þ227-74 “Rights in Data
General” then the “Alternate III” clause applies.
U.S. Government Users Restricted Rights — Use, duplication or disclosure restricted by GSA ADP Schedule
Contract.
Unpublished — All rights reserved under the Copyright Laws of the United States.
Document History
Part Number Product Version Published
142466 N.A. August 1998